Activity

From 09/14/2011 to 10/13/2011

10/13/2011

06:18 pm Task #1830 (Assigned): Create ROS Node: Analog
Create the ROS node for the analog. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The nod... Ben Wasserman
06:16 pm Task #1829 (Assigned): Create ROS Node: BOM
Create the ROS node for the BOM. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node d... Ben Wasserman
06:07 pm Task #1828 (Assigned): Create ROS Node: Cliffsensors
Create the ROS node for the cliffsensors. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. T... Ben Wasserman
06:06 pm Task #1827 (Fixed): Create ROS Node: AVR Bridge
Create the ROS node for the avr bridge. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The... Ben Wasserman
06:06 pm Task #1826 (Assigned): Create ROS Node: USB Serial
Create the ROS node for the USB serial. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The... Ben Wasserman
06:05 pm Task #1825 (Assigned): Create ROS Node: Wireless
Create the ROS node for the wireless. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The n... Ben Wasserman
06:04 pm Task #1824 (Fixed): Create ROS Node: Sonar
Create the ROS node for the sonar. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node... Ben Wasserman
06:02 pm Task #1823 (Assigned): Create ROS Node: Encoders
Create the ROS node for the encoders. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The n... Ben Wasserman
06:02 pm Task #1822 (Assigned): Create ROS Node: Accessory
Create the ROS node for the accessory. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The ... Ben Wasserman
05:59 pm Task #1821 (Assigned): Create ROS Node: IMU
Create the ROS node for the IMU. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node d... Ben Wasserman
05:58 pm Task #1820 (Fixed): Create ROS Node: Power
Create the ROS node for the power system. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. T... Ben Wasserman
05:57 pm Task #1819 (Fixed): Create ROS Node: Headlights
Create the ROS node for the headlights. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The... Ben Wasserman
05:55 pm Task #1818 (Assigned): Create ROS Node: Timer
Create the ROS node for the timer. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos. The node... Ben Wasserman
05:51 pm Task #1817 (Assigned): Create ROS Node: Buttons
Create the ROS node for the buttons. The git repo can be found: git clone ssh://roboclub.org/home/svn/scoutos Ben Wasserman

10/12/2011

10:16 am Enhancement #1808 (Assigned): Video for Scout Intro
ala Google's awesome sketchy intro videos
http://www.youtube.com/watch?v=0QRO3gKj3qw&feature=results_main&playnext=1...
Dan Shope
10:09 am Bug #1807 (Assigned): Website Work Log
-Add pictures to the sensors & comm page on www.colonyscout.com-
-Default mode for sensors should be expanded, not...
Dan Shope

10/11/2011

12:16 pm Bug #1806: Gumstix Memory Change
I believe I'm using more recent bootloaders than October 2010. If not, the actual boot process and what is booting (... Jeff Cooper
12:05 pm Bug #1806 (Wontfix): Gumstix Memory Change
FYI, new Gumstix boards have changed hardware
http://www.gumstix.org/hardware-design/product-changes-known-issues-a-...
Dan Shope
11:24 am Revision 126146b7 (colonymech): Added WebsiteSlider graphics and custom google apps logo.
Dan Shope
02:28 am Task #1805: Cheaper Gumstix, Check Compatiblity
The lack of onboard NAND (flash memory) is not a problem. What could potentially be a problem is that it only has ha... Jeff Cooper
02:15 am Task #1805 (Fixed): Cheaper Gumstix, Check Compatiblity
See if this is a drop-in replacement for our current (Overo Earth) Gumstix. We could save $35/board.
https://www.gum...
Dan Shope

10/10/2011

04:02 pm Enhancement #1799 (Fixed): Setup support@colonyscout.com
We have a Google Apps domain setup for ColonyScout - this has our docs, mail, etc.
Support@ has been added to this...
Dan Shope
03:18 pm Revision 00842750 (scoutos): Edited manifest.xml and mainpage.dox to have better descriptions.
Ben Wasserman
02:52 pm Enhancement #1530: Create roboclub demo
Bumped for Oct 23 Pittsburgh Maker Faire Dan Shope
02:05 pm Revision 5a69879a (colonymech): Updated BOM sketch block for 5mm diameter hardware. Added signpos...
Dan Shope
01:45 pm Revision 36d4e296 (colonymech): Updated website with shopping cart and pricing page. Updated CAD ...
Dan Shope
12:00 pm Task #1801 (Fixed): Call Freeman Supply about Color Mixing
Called Tech Support this morning - No degradation of performance or shelf life (as long as using Freeman or Huntsman ... Dan Shope
01:17 am Revision 7ba378cb (colonymech): Added cliff sensor mounts.
Dan Shope

10/09/2011

03:07 pm Task #1791 (Fixed): Fastener Purchasing
Reimbursement received. Dan Shope
03:05 pm Task #1801 (Fixed): Call Freeman Supply about Color Mixing
Find out if it is safe (no degradation of shelf life/performance) to store Urethanes with premixed (liquid) colors. W... Dan Shope
03:01 pm Task #1800 (Assigned): Research PCB Assemby Costing
Max B has worked with EPD (http://www.epdelectronics.com/gallery.html) outside of Pittsburgh - slow turn, high volume. Dan Shope
03:01 pm Enhancement #1799 (Fixed): Setup support@colonyscout.com
For email based support - forward to colony.scout@gmail.com - this ties into our Assistly customer support help desk. Dan Shope
05:31 am Revision 056305bf (colonymech): Updated hood details (aesthetic button cutout, latching mechanism...
Dan Shope
04:54 am Task #1789: Test Cliff Sensors
Also, it makes sense that it works poorly at the angled orientation - the surface roughness has to be > wavelength in... Dan Shope
04:51 am Task #1789: Test Cliff Sensors
Great work!
We should still look at the signal (scope or log via microcontroller) lines to see what the transient ...
Dan Shope
03:57 am Task #1798 (Assigned): Mechanical Work Log
* Create undercut latch for hood (center, recess on front lip)
* Increase height of hood scoop (aesthetic)
* Model ...
Dan Shope

10/08/2011

12:49 am Task #1789: Test Cliff Sensors
Preliminary Test Results:
Test Rig:
Power: Colony 5xNi-MH battery pack (charged, or at least above 6v for entire te...
Alexander Lam
10:53 pm Task #1789: Test Cliff Sensors
Test various speeds
Suggested
* Slow - 5 in/sec
* Medium - 15 in/sec
* Fast - >25 in/sec
Dan Shope
11:34 pm Enhancement #1797 (Assigned): Design SmartFly Smart Acessory Reference Board
Based on Arduino Pro Mini (schematic) - see http://www.roboticsclub.org/redmine/projects/colonyscout/wiki/ECESmartAcc... Dan Shope
11:01 pm Enhancement #1796 (Assigned): Audio Command & Output Accessory
Microphone + Speaker output, possible use a speech generation chip and/or voice recognition chip OR load software ont... Dan Shope
10:59 pm Task #1724: Money Requisition
Looking for >$4000 for development (prototyping and manufacturing) of 5-10 robot kits for internal use in the Robotic... Dan Shope
10:51 pm Task #1793 (Fixed): Create mockup for Cliff Sensor Testing
Dan Shope
10:29 pm Revision b64c27b7 (scoutos): Merge ssh://roboclub.org/home/svn/scoutos
Ben Wasserman
10:26 pm Revision 0121ead7 (scoutos): Added the ROS stack with the libscout, motors, and sonar packages to...
Ben Wasserman

10/07/2011

01:38 pm Task #1777: Parts Order for Fall Prototype Testing
Sent order to Robbie. Waiting on parts. Priyanka Deo
08:18 am Revision a918b9bd (colonymech): Added STL for right headlight and pivot lock plate
Dan Shope
07:18 am Revision 843b2375 (colonymech): Updated wiring guides and schematic.
Dan Shope
06:46 am Revision d32d29a2 (colonymech): Updated master STLs for 3D printing. Updated wiring diagrams and ...
Dan Shope
04:57 am Task #1793 (Fixed): Create mockup for Cliff Sensor Testing
Build a mock Scout (or provide dimensions to MechE team) that holds (3) cliff sensors for testing. Dan Shope
04:52 am Task #1792 (Assigned): Electronics Purchasing, OCT-08
IN PROGRESS
*Digikey*
QTY 12 - Power Switch - http://search.digikey.com/scripts/DkSearch/dksus.dll?x=0&y=0&lang=en&...
Dan Shope
04:48 am Task #1791 (Fixed): Fastener Purchasing
File for reimbursement:
QTY 2 - 100pk 1/4" Threading Screws - http://www.mcmaster.com/#93878a106/=edu5mj
QTY 1 - 50...
Dan Shope

10/06/2011

05:28 pm Revision 6aece861 (scoutece): Added kwoo's standalone charging schematic.
charging_test.sch is a standalone circuit schematic for a prototype to
test the charging circuit that will ultimately...
Abraham Levkoy
02:01 am Task #1789 (Fixed): Test Cliff Sensors
Option 1:
Wire cliff sensors directly to LEDs, move across different surfaces and record behavior (false positives, ...
Dan Shope
09:18 pm Revision 3a135404 (colonymech): Created reference geometry (surfaces only) for rear accessory des...
Dan Shope

10/05/2011

07:45 pm Revision 358dfffe (colonymech): Added Kinect accessory mount. Added back pivot block and diamond ...
Dan Shope
04:53 pm Revision a9a82abe (colonymech): Separated Rev4 CAD models into dedicated directory, removed out o...
Dan Shope
04:06 pm Revision a4bfa38b (colonymech): Re-organized CAD. Archived old diagnostic station, renamed Autono...
Dan Shope
03:43 pm Task #1431 (Wontfix): Spec front air filter foam
Dan Shope
03:43 pm Task #1480 (Wontfix): Find red Powder Coating
Dan Shope
03:43 pm Enhancement #1485 (Fixed): Viability of switching Gyros (larger range, faster, cheaper, smaller)
Dan Shope
03:43 pm Task #1514 (Wontfix): Powdercoating from Electro-kote
Dan Shope
03:41 pm Revision d286ea26 (colonymech): Re-organized renders and graphics. Photos now grouped by subassem...
Dan Shope

10/03/2011

07:32 pm Revision 1f8c3e29 (colonymech): Added strengthening lip behind bumper.
Dan Shope
02:53 pm Task #1777: Parts Order for Fall Prototype Testing
Three vendors - SparkFun, Newark, and Pololu - please group by vendor before sending on to Treasurer/Peggy.
I've o...
Dan Shope
02:44 pm Task #1777 (Fixed): Parts Order for Fall Prototype Testing
For testing IR BOM
|QTY|ITEM|LINK|$/EA|
|8|60K6999|"Page":http://www.newark.com/vishay-semiconductor/tsop4838/ir-re...
Dan Shope

09/30/2011

10:13 pm Revision b68f4fd7 (scoutece): Finished hooking up new gyroscope.
Connected pitch output of gyroscope to AVR and gave pitch an output LPF.
Added optional HPFs to both pitch and yaw ou...
Abraham Levkoy

09/29/2011

12:19 am Revision 7de130c2 (colonymech): Updated buttons for 2 rocking positions
Dan Shope
11:17 pm Revision 928e9487 (colonymech): Added button capture to hood button.
Dan Shope

09/28/2011

04:04 pm Revision c406f16b (scoutos): Created first version of git repository; added libscout and motors p...
The repository root is the ros directory, which contains the ROS stack for the scout project.
The included files are ...
Ben

09/17/2011

04:44 am Task #1727: Update Boards on Eagle
Reversed FFC connector and switched to new gyroscope part. Still need to prototype new power regulator circuit and th... Abraham Levkoy
04:39 am Revision 0075932e (scoutece): Routed new gyroscope.
Routed new gyroscope on board in Eagle. Abraham Levkoy
03:53 am Revision 64958645 (scoutece): Swapped gyroscope part in schematic.
Replaced old gyroscope part with new one in schematic. Assuming that
pitch output or amplified outputs are undesired....
Abraham Levkoy

09/15/2011

05:30 am Revision d4a38876 (scoutece): Added Eagle part for new gyroscope.
Created symbol for new gyroscope (LPY5150AL). This part is sold by
Sparkfun but not in the Sparkfun Eagle library. An...
Abraham Levkoy
 

Also available in: Atom