Activity
From 09/10/2010 to 10/09/2010
10/09/2010
- 07:50 PM Bug #1491 (Fixed): Clean up BOM page
- Updated
https://www.roboticsclub.org/redmine/projects/colonyscout/wiki/Integrated_BOM - 03:32 PM Bug #1491 (Fixed): Clean up BOM page
- Has reference to ranging bom -- move this into old section.
- 12:18 AM Task #1425: Find new battery supplier
- Battery is out of stock until December 10, 2010 (according to email from sales@ on 10-08-2010)
http://www.batteryspa...
10/08/2010
- 12:46 PM Revision 5e6a72bb (scoutece): re-ran CAM with dimension layer
- 12:44 PM Revision 08e1f529 (scoutece): added dimensions file
- 06:23 AM Revision 4fe4621c (colonymech): Magnets now clasp on Scoutfly bolts, headlights clear filter moun...
- 05:52 AM Revision 4e999f10 (colonymech): Added air filters and clips, scoutfly mounting hardware. Updated ...
- 12:56 AM Enhancement #1485 (Fixed): Viability of switching Gyros (larger range, faster, cheaper, smaller)
- New gyro from SparkFun ($7.95/ea)
http://www.sparkfun.com/commerce/product_info.php?products_id=9445
Available ch... - 08:44 PM Revision b682ad2e (colonymech): Rear cover now single piece, replacing rear batt support. Updated...
10/07/2010
- 06:58 PM Revision 577611a0 (colonymech): Fixed alignment of wheel wells.
- 06:34 PM Revision fd32a4f2 (colonymech): Revised front assembly, added bend check tools. Updated wiring sc...
- 12:48 AM Revision e8c100a1 (colonymech): Added firewall to front baseplate, lengthened wheelbase
10/05/2010
- 03:02 PM Bug #1482 (Fixed): Purchase equipment for surface mount soldering
- *Need new tweezers (antimagnetic, fine tip)*
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=EROP7S... - 02:10 AM Task #1480 (Wontfix): Find red Powder Coating
- purchase red http://powderbuythepound.com/catalog/images/candyredweb.jpg powder coat, or find out if Jason Meredith i...
- 01:37 AM Revision edaffaf1 (colonymech): Started internal scout website for inventory and part tracking
- 12:32 AM Task #1471: DFM Check on Breakfly
- The Sparkfun tutorial is a good start. Look at http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=109 st...
- 11:35 PM Task #1478 (Assigned): BOM Send/Receive Functions
- develop a function for parsing input using the Sharp 38khz protocol
code is running on the ATMega128RFA1. Consult ...
10/04/2010
- 03:42 PM Revision 93c9e9e1 (colonymech): Added presentations and reference files
- 03:41 PM Revision df3fc813 (colonymech): Added funding proposals and accessory design specs
- 03:40 PM Revision 7422d593 (colonymech): Added website (internal & external) files
- 03:39 PM Revision 15c24319 (colonymech): Added component specs
- 03:36 PM Revision 2078a38b (colonymech): Added renders directory
- 03:35 PM Revision 0b6ae624 (scoutece): using 11 mil clearance, added latest gerber zip
- 03:32 PM Revision 91d5ae2e (colonymech): Added logos and renders directories
- 06:32 AM Task #1468: Purchase storage bins for electrical and mechanical parts
- Labels are purchased, waiting to buy the bins -- found (3) 27 drawer organizers in roboclub. Cleaning up and using fo...
- 12:56 AM Task #1468: Purchase storage bins for electrical and mechanical parts
- Also purchase (laser) printable labels
"8000ct (0.5"x1.75"), white":http://www.amazon.com/gp/product/B002G4JRMA/ref=... - 12:39 AM Task #1468 (Fixed): Purchase storage bins for electrical and mechanical parts
- Circuit boards have 100+ unique parts, 20-30 (small) parts for mechanical and sensors
(QTY 2) 44 bins, large and s... - 03:12 AM Task #975 (Wontfix): Hood Buttons
- 03:11 AM Task #1471 (Fixed): DFM Check on Breakfly
- creater gerber files for Breakfly and check on freedfm.com
- 03:10 AM Task #1087 (Fixed): Design Breakfly
- 02:12 AM Task #1470 (Fixed): Design bending check parts
- Layout (flat) tools for checking the bend profile of the baseplates and other bent parts. Should be cut from 0.63" TH...
- 02:06 AM Task #1431: Spec front air filter foam
- This might be too dense, but is easy to cut and available at craft stores, etc. We shouldn't have too many thermal ov...
- 02:03 AM Enhancement #1469 (Fixed): Spring return on rocker pivot
- Design a few concept methods of spring return. Emphasis on very simple, low part count, and cost. Must be <$1 assembl...
- 12:34 AM Task #817 (Fixed): Machine pivot blocks
- 09:07 PM Revision 4f7d0ad8 (colonymech): Added 3D print files
- 08:56 PM Revision 0a40eeee (colonymech): Fixed file names
- 08:45 PM Revision dbe32020 (colonymech): Renamed and linked files into system based structure
10/03/2010
- 06:00 PM Revision 69490f84 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
- 06:00 PM Revision 8da595fa (scoutece): added gerbers as of october 3, 2010. dfm check in progress.
- 04:52 PM Revision e6d7e8f4 (scoutece): Increased trace width on VCC and ACC_5V lines
- 04:04 PM Revision 0c208777 (scoutece): Changed trace angles to 45deg and moved vias from silkscreen
- 04:48 AM Revision 695b4792 (scoutece): Added SmartFly directory and component specs for ATtiny261
- 08:02 PM Revision 0cae467a (scoutece): Added website silk and moved vias away from silk labels
10/02/2010
- 05:01 PM Revision 556b570c (scoutece): Rerouted traces for aesthetics
- 04:24 PM Revision b89112d4 (scoutece): Revised to pass DRC, added top ground plane and connecting vias
- 02:02 PM Bug #1459 (Fixed): resize breakfly power traces
- 05:29 AM Bug #1459 (Fixed): resize breakfly power traces
- should be 10-16mils
- 06:58 AM Revision a6d3ef7d (scoutece): Changed power traces to 16mil, refined layout
- 06:04 AM Revision d0414ffa (colonymech): Added Breakfly board connectors and updated rear assembly for bre...
- 05:27 AM Revision 73a9bda8 (scoutece): Changed trace width to 8mil as per BatchPCB DRC, changed stepper to...
- 05:14 AM Revision a29d1267 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
- 05:14 AM Revision f81c1cf2 (scoutece): updated scoutfly with new jst parts
- 05:13 AM Revision 03cd303f (scoutece): updated silk on jst parts
- 03:53 AM Revision 3d87cfc5 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
- 03:53 AM Revision 8816f777 (scoutece): All components routed, first pass. Needs cleaned up and final silk ...
- 03:17 AM Revision d728c9d0 (scoutece): updated gitignore for temp library files
- 02:27 AM Revision 6bcb5074 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
- 02:27 AM Revision 2ca21076 (scoutece): added JST_6 VERT part
- 02:23 AM Revision f8575683 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
- 02:22 AM Revision 23f3c5b5 (scoutece): Started routing, all but sonar and stepper.
- 01:25 AM Bug #1455 (Fixed): Rename Edge Detector silk
- Turns out that the cliff sensors are actually button headers, so I redid the silk.
- 12:45 AM Bug #1455: Rename Edge Detector silk
- Silk done.
The cliff sensor headers are not evenly spaced. Fix? - 12:46 AM Bug #1443: Investigate non-RA JST Headers
- Part changed to vertical on scoutfly.
- 12:45 AM Bug #1443 (Fixed): Investigate non-RA JST Headers
- 12:37 AM Revision 8881541a (scoutece): swapped jst-5 headers from right angle to vertical
- 10:06 PM Revision c3058e17 (scoutece): Added .gitignore file to ignore Eagle temp files
- 09:56 PM Revision 5b9e82f5 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
- 09:55 PM Revision 5656b5b1 (scoutece): Added silk and mounting holes
- 08:50 PM Revision 852fef4c (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
- 08:50 PM Revision 6a759754 (scoutece): Roboclub logo library
10/01/2010
- 03:57 PM Bug #1455 (Fixed): Rename Edge Detector silk
- On Scoutfly -- rename Edge Detectors to CLIFF0, CLIFF1, CLIFF2.
Cliff 0 is the front sensor, I believe this is lab... - 03:52 PM Task #999 (Fixed): Colony III Members
- 03:51 PM Task #974 (Fixed): Accessory Ball Bearing
- 03:51 PM Bug #1096 (Fixed): Orb Reflectors
- 03:51 PM Bug #1385 (Fixed): Scoutfly mounting holes to ground plane
- 03:50 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
- 03:50 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
- 02:14 PM Revision c1e53ab6 (scoutece): Added 5x2 accessory header and placed components
- 04:44 AM Revision 53f8278b (scoutece): Added board perimeter, consolidated power connectors
- 02:10 AM Revision c2b99a7d (scoutece): Revised header placement on breafkly for more efficent routing
- 12:03 AM Revision 4049ea60 (scoutece): Renamed board to breakfly.sch
- 08:51 PM Revision 8403f0b7 (scoutece): Added breakfly diagram
09/30/2010
- 05:15 PM Revision f0540dcf (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
- 05:07 PM Revision 7dd29004 (scoutece): initial commit jst-based breakfly board
- 04:32 PM Revision 03b2958c (scoutece): Renamed (molex cgrid) Breakfly schematic to breakfly_old. Starting ...
- 02:39 AM Revision c186ea43 (colonymech): Added JST connectors, Revised Breakfly with JST connectors. Chang...
- 11:22 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
09/29/2010
- 04:39 PM Revision ae2e5bab (scoutece): updated kwoo.lbr with vertical package to jst_5
- 04:15 PM Revision f98422cf (scoutece): changed accessory pin names and moved one to sonar.
- 12:43 PM Revision b3c037bf (colonymech): New: Alex Munoz headlight cover. Modified Breakfly model, added F...
09/27/2010
- 05:27 AM Revision 9330ec5f (colonymech): Added rear BOM, fasteners to all holes. Modified charging contact...
- 10:01 PM Revision 2dc2cb18 (colonymech): Added routing for FFC, Adjusted front side panel cutout aesthetic...
09/26/2010
- 07:38 PM Revision f7a00d18 (scoutece): redid traces for front screw holes to avoid antenna. moved battery ...
- 05:51 PM Revision 63a38060 (scoutece): 4 Layer, 6mil trace/width, 15mil drill minimum drc file
- 04:29 PM Revision 6f1fca09 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
- 04:28 PM Revision 0128ce26 (scoutece): added grounded srew holes to scoutfly. for review by kwoo.
- 03:52 PM Bug #1442: Scoutfly - Add Grounded Screw Holes
- Coordinates:
(150, 3350) (4350,3350)
(150,150) (4350,150) - 03:12 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
- Add vias connected to ground
- .116 drill hole
- .179 pad diameter
- .250 diameter clearance for ring terminal
... - 03:20 PM Bug #1443 (Fixed): Investigate non-RA JST Headers
- What kind of footprint for vertical JST headers on right side of board?
- 03:10 PM Bug #1441 (Fixed): Scoutfly - Change resistor and capacitor values for BOM detector
- Resistors: 100 ohm
Capacitors: 0.1 uF - 03:08 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
- 02:30 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
- currently is 481ohms
we are sourcing 487ohm parts instead, so update values to reflect this change. - 05:04 AM Revision 0dbdf2f6 (colonymech): Detailed Scoutfly board. Remade wheel file for rendering
- 10:26 PM Revision 7fda2a22 (colonymech): Integrated front and side BOM sensors
- 08:13 PM Revision d6c139ef (colonymech): Added front BOM using TSOP4838 and TSAL6200 sensors.
09/25/2010
- 02:04 PM Revision a97a8df0 (colonymech): Added rear bushing and created retaining barrier for charging con...
- 01:21 PM Task #974: Accessory Ball Bearing
- Using http://www.mcmaster.com/#sleeve-bearings/=903cbo
Flange on bottom of chassis, extending up into a press-fit ... - 05:42 AM Revision 75171b71 (colonymech): Created Breakfly model and selected accessory header
- 09:40 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
- Why do you need <EOM> on a ticket name....unnecessary...
Latest pushed. - 09:39 PM Revision 4ce7e37d (scoutece): Latest version of the library containing most of the scout parts
09/24/2010
- 01:03 PM Task #1425 (Fixed): Find new battery supplier
- 01:02 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
- 12:58 PM Revision bd96ce91 (colonymech): Prepped files for 3D printing. Added homing switch to stepper cover.
09/23/2010
- 06:07 PM Revision 7fda8756 (colonymech): Added supports for front hood and circuit board mounting.
- 04:38 AM Revision be6126b8 (colonymech): Updated stepper cover. Fixed interferences in sonar cover
- 04:00 AM Revision a3525daa (colonymech): Added stepper homing cover. 1 sheet metal version, 1 plastic vers...
09/22/2010
- 04:59 PM Revision 3a90bae3 (colonymech): Added cover for sonar boards
- 01:58 AM Revision 94564c47 (colonymech): Added Archives and Accessories. Updated rear chassis
- 12:49 AM Revision 506bf0d9 (colonymech): Initial commit of SolidWorks CAD model
- 09:25 PM Task #1425: Find new battery supplier
- Looking for 1.35" x 1.35" x 2.5" battery. We can accommodate a longer battery (up to 4.5" long) or a shorter battery ...
- 09:22 PM Task #1425: Find new battery supplier
- Closest to cost is: ($22.95 vs the old battery cost of $19.95). Note the spec is now only 3.0Ah, instead of 4.0Ah
ht... - 09:16 PM Task #818 (Fixed): Battery Testing
- 09:15 PM Task #1431 (Wontfix): Spec front air filter foam
- Front side panels are covered (inside) with open cell foam (gray/black). Find a thin foam suitable for some dust prot...
- 09:13 PM Task #844 (Wontfix): Bootloader
- 09:13 PM Bug #1096: Orb Reflectors
- Attach to inside of hood
- 09:13 PM Task #1098 (Wontfix): ask aaron and cornell about arm stuff
- 09:13 PM Task #1381 (Fixed): acquire ATMega 128RFA1 chips
09/21/2010
- 01:19 AM Task #1425: Find new battery supplier
- Emailed BatterySpace.com about making a custom pack for us: NO DICE
Hi Dan,
Thanks for the inquiry.
The ba...
09/19/2010
- 02:19 PM Task #1425 (Fixed): Find new battery supplier
- BatterySpace.com no longer offers the Scout battery, and all comparable products are nearly 2x in price
http://www...
Also available in: Atom