Project

General

Profile

Activity

From 09/09/2010 to 10/08/2010

10/08/2010

12:46 PM Revision 5e6a72bb (scoutece): re-ran CAM with dimension layer
Dan Shope
12:44 PM Revision 08e1f529 (scoutece): added dimensions file
Chris Mar
06:23 AM Revision 4fe4621c (colonymech): Magnets now clasp on Scoutfly bolts, headlights clear filter moun...
Dan Shope
05:52 AM Revision 4e999f10 (colonymech): Added air filters and clips, scoutfly mounting hardware. Updated ...
Dan Shope
12:56 AM Enhancement #1485 (Fixed): Viability of switching Gyros (larger range, faster, cheaper, smaller)
New gyro from SparkFun ($7.95/ea)
http://www.sparkfun.com/commerce/product_info.php?products_id=9445
Available ch...
Dan Shope
08:44 PM Revision b682ad2e (colonymech): Rear cover now single piece, replacing rear batt support. Updated...
Dan Shope

10/07/2010

06:58 PM Revision 577611a0 (colonymech): Fixed alignment of wheel wells.
Dan Shope
06:34 PM Revision fd32a4f2 (colonymech): Revised front assembly, added bend check tools. Updated wiring sc...
Dan Shope
12:48 AM Revision e8c100a1 (colonymech): Added firewall to front baseplate, lengthened wheelbase
Dan Shope

10/05/2010

03:02 PM Bug #1482 (Fixed): Purchase equipment for surface mount soldering
*Need new tweezers (antimagnetic, fine tip)*
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=EROP7S...
Dan Shope
02:10 AM Task #1480 (Wontfix): Find red Powder Coating
purchase red http://powderbuythepound.com/catalog/images/candyredweb.jpg powder coat, or find out if Jason Meredith i... Dan Shope
01:37 AM Revision edaffaf1 (colonymech): Started internal scout website for inventory and part tracking
Dan Shope
12:32 AM Task #1471: DFM Check on Breakfly
The Sparkfun tutorial is a good start. Look at http://www.sparkfun.com/commerce/tutorial_info.php?tutorials_id=109 st... Dan Shope
11:35 PM Task #1478 (Assigned): BOM Send/Receive Functions
develop a function for parsing input using the Sharp 38khz protocol
code is running on the ATMega128RFA1. Consult ...
Dan Shope

10/04/2010

03:42 PM Revision 93c9e9e1 (colonymech): Added presentations and reference files
Dan Shope
03:41 PM Revision df3fc813 (colonymech): Added funding proposals and accessory design specs
Dan Shope
03:40 PM Revision 7422d593 (colonymech): Added website (internal & external) files
Dan Shope
03:39 PM Revision 15c24319 (colonymech): Added component specs
Dan Shope
03:36 PM Revision 2078a38b (colonymech): Added renders directory
Dan Shope
03:35 PM Revision 0b6ae624 (scoutece): using 11 mil clearance, added latest gerber zip
Chris Mar
03:32 PM Revision 91d5ae2e (colonymech): Added logos and renders directories
Dan Shope
06:32 AM Task #1468: Purchase storage bins for electrical and mechanical parts
Labels are purchased, waiting to buy the bins -- found (3) 27 drawer organizers in roboclub. Cleaning up and using fo... Dan Shope
12:56 AM Task #1468: Purchase storage bins for electrical and mechanical parts
Also purchase (laser) printable labels
"8000ct (0.5"x1.75"), white":http://www.amazon.com/gp/product/B002G4JRMA/ref=...
Dan Shope
12:39 AM Task #1468 (Fixed): Purchase storage bins for electrical and mechanical parts
Circuit boards have 100+ unique parts, 20-30 (small) parts for mechanical and sensors
(QTY 2) 44 bins, large and s...
Dan Shope
03:12 AM Task #975 (Wontfix): Hood Buttons
Dan Shope
03:11 AM Task #1471 (Fixed): DFM Check on Breakfly
creater gerber files for Breakfly and check on freedfm.com Dan Shope
03:10 AM Task #1087 (Fixed): Design Breakfly
Dan Shope
02:12 AM Task #1470 (Fixed): Design bending check parts
Layout (flat) tools for checking the bend profile of the baseplates and other bent parts. Should be cut from 0.63" TH... Dan Shope
02:06 AM Task #1431: Spec front air filter foam
This might be too dense, but is easy to cut and available at craft stores, etc. We shouldn't have too many thermal ov... Dan Shope
02:03 AM Enhancement #1469 (Fixed): Spring return on rocker pivot
Design a few concept methods of spring return. Emphasis on very simple, low part count, and cost. Must be <$1 assembl... Dan Shope
12:34 AM Task #817 (Fixed): Machine pivot blocks
Dan Shope
09:07 PM Revision 4f7d0ad8 (colonymech): Added 3D print files
Dan Shope
08:56 PM Revision 0a40eeee (colonymech): Fixed file names
Dan Shope
08:45 PM Revision dbe32020 (colonymech): Renamed and linked files into system based structure
Dan Shope

10/03/2010

06:00 PM Revision 69490f84 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
06:00 PM Revision 8da595fa (scoutece): added gerbers as of october 3, 2010. dfm check in progress.
Chris Mar
04:52 PM Revision e6d7e8f4 (scoutece): Increased trace width on VCC and ACC_5V lines
Dan Shope
04:04 PM Revision 0c208777 (scoutece): Changed trace angles to 45deg and moved vias from silkscreen
Dan Shope
04:48 AM Revision 695b4792 (scoutece): Added SmartFly directory and component specs for ATtiny261
Dan Shope
08:02 PM Revision 0cae467a (scoutece): Added website silk and moved vias away from silk labels
Dan Shope

10/02/2010

05:01 PM Revision 556b570c (scoutece): Rerouted traces for aesthetics
Dan Shope
04:24 PM Revision b89112d4 (scoutece): Revised to pass DRC, added top ground plane and connecting vias
Dan Shope
02:02 PM Bug #1459 (Fixed): resize breakfly power traces
Dan Shope
05:29 AM Bug #1459 (Fixed): resize breakfly power traces
should be 10-16mils Dan Shope
06:58 AM Revision a6d3ef7d (scoutece): Changed power traces to 16mil, refined layout
Dan Shope
06:04 AM Revision d0414ffa (colonymech): Added Breakfly board connectors and updated rear assembly for bre...
Dan Shope
05:27 AM Revision 73a9bda8 (scoutece): Changed trace width to 8mil as per BatchPCB DRC, changed stepper to...
Dan Shope
05:14 AM Revision a29d1267 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
05:14 AM Revision f81c1cf2 (scoutece): updated scoutfly with new jst parts
Chris Mar
05:13 AM Revision 03cd303f (scoutece): updated silk on jst parts
Chris Mar
03:53 AM Revision 3d87cfc5 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
03:53 AM Revision 8816f777 (scoutece): All components routed, first pass. Needs cleaned up and final silk ...
Dan Shope
03:17 AM Revision d728c9d0 (scoutece): updated gitignore for temp library files
Chris Mar
02:27 AM Revision 6bcb5074 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
02:27 AM Revision 2ca21076 (scoutece): added JST_6 VERT part
Chris Mar
02:23 AM Revision f8575683 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
02:22 AM Revision 23f3c5b5 (scoutece): Started routing, all but sonar and stepper.
Dan Shope
01:25 AM Bug #1455 (Fixed): Rename Edge Detector silk
Turns out that the cliff sensors are actually button headers, so I redid the silk. Chris Mar
12:45 AM Bug #1455: Rename Edge Detector silk
Silk done.
The cliff sensor headers are not evenly spaced. Fix?
Chris Mar
12:46 AM Bug #1443: Investigate non-RA JST Headers
Part changed to vertical on scoutfly. Chris Mar
12:45 AM Bug #1443 (Fixed): Investigate non-RA JST Headers
Chris Mar
12:37 AM Revision 8881541a (scoutece): swapped jst-5 headers from right angle to vertical
Chris Mar
10:06 PM Revision c3058e17 (scoutece): Added .gitignore file to ignore Eagle temp files
Dan Shope
09:56 PM Revision 5b9e82f5 (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
09:55 PM Revision 5656b5b1 (scoutece): Added silk and mounting holes
Dan Shope
08:50 PM Revision 852fef4c (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Kevin Woo
08:50 PM Revision 6a759754 (scoutece): Roboclub logo library
Kevin Woo

10/01/2010

03:57 PM Bug #1455 (Fixed): Rename Edge Detector silk
On Scoutfly -- rename Edge Detectors to CLIFF0, CLIFF1, CLIFF2.
Cliff 0 is the front sensor, I believe this is lab...
Dan Shope
03:52 PM Task #999 (Fixed): Colony III Members
Dan Shope
03:51 PM Task #974 (Fixed): Accessory Ball Bearing
Dan Shope
03:51 PM Bug #1096 (Fixed): Orb Reflectors
Dan Shope
03:51 PM Bug #1385 (Fixed): Scoutfly mounting holes to ground plane
Dan Shope
03:50 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
Dan Shope
03:50 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
Dan Shope
02:14 PM Revision c1e53ab6 (scoutece): Added 5x2 accessory header and placed components
Dan Shope
04:44 AM Revision 53f8278b (scoutece): Added board perimeter, consolidated power connectors
Dan Shope
02:10 AM Revision c2b99a7d (scoutece): Revised header placement on breafkly for more efficent routing
Dan Shope
12:03 AM Revision 4049ea60 (scoutece): Renamed board to breakfly.sch
Dan Shope
08:51 PM Revision 8403f0b7 (scoutece): Added breakfly diagram
Dan Shope

09/30/2010

05:15 PM Revision f0540dcf (scoutece): Merge branch 'master' of roboclub8.frc.ri.cmu.edu:/home/svn/scouthw
Dan Shope
05:07 PM Revision 7dd29004 (scoutece): initial commit jst-based breakfly board
unknown
04:32 PM Revision 03b2958c (scoutece): Renamed (molex cgrid) Breakfly schematic to breakfly_old. Starting ...
Dan Shope
02:39 AM Revision c186ea43 (colonymech): Added JST connectors, Revised Breakfly with JST connectors. Chang...
Dan Shope
11:22 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
Chris Mar

09/29/2010

04:39 PM Revision ae2e5bab (scoutece): updated kwoo.lbr with vertical package to jst_5
Chris Mar
04:15 PM Revision f98422cf (scoutece): changed accessory pin names and moved one to sonar.
Chris Mar
12:43 PM Revision b3c037bf (colonymech): New: Alex Munoz headlight cover. Modified Breakfly model, added F...
Dan Shope

09/27/2010

05:27 AM Revision 9330ec5f (colonymech): Added rear BOM, fasteners to all holes. Modified charging contact...
Dan Shope
10:01 PM Revision 2dc2cb18 (colonymech): Added routing for FFC, Adjusted front side panel cutout aesthetic...
Dan Shope

09/26/2010

07:38 PM Revision f7a00d18 (scoutece): redid traces for front screw holes to avoid antenna. moved battery ...
Chris Mar
05:51 PM Revision 63a38060 (scoutece): 4 Layer, 6mil trace/width, 15mil drill minimum drc file
Kevin Woo
04:29 PM Revision 6f1fca09 (scoutece): Merge branch 'master' of ssh://roboclub.org/home/svn/scouthw
Chris Mar
04:28 PM Revision 0128ce26 (scoutece): added grounded srew holes to scoutfly. for review by kwoo.
Chris Mar
03:52 PM Bug #1442: Scoutfly - Add Grounded Screw Holes
Coordinates:
(150, 3350) (4350,3350)
(150,150) (4350,150)
Chris Mar
03:12 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
Add vias connected to ground
- .116 drill hole
- .179 pad diameter
- .250 diameter clearance for ring terminal
...
Chris Mar
03:20 PM Bug #1443 (Fixed): Investigate non-RA JST Headers
What kind of footprint for vertical JST headers on right side of board? Chris Mar
03:10 PM Bug #1441 (Fixed): Scoutfly - Change resistor and capacitor values for BOM detector
Resistors: 100 ohm
Capacitors: 0.1 uF
Chris Mar
03:08 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
Chris Mar
02:30 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
currently is 481ohms
we are sourcing 487ohm parts instead, so update values to reflect this change.
Dan Shope
05:04 AM Revision 0dbdf2f6 (colonymech): Detailed Scoutfly board. Remade wheel file for rendering
Dan Shope
10:26 PM Revision 7fda2a22 (colonymech): Integrated front and side BOM sensors
Dan Shope
08:13 PM Revision d6c139ef (colonymech): Added front BOM using TSOP4838 and TSAL6200 sensors.
Dan Shope

09/25/2010

02:04 PM Revision a97a8df0 (colonymech): Added rear bushing and created retaining barrier for charging con...
Dan Shope
01:21 PM Task #974: Accessory Ball Bearing
Using http://www.mcmaster.com/#sleeve-bearings/=903cbo
Flange on bottom of chassis, extending up into a press-fit ...
Dan Shope
05:42 AM Revision 75171b71 (colonymech): Created Breakfly model and selected accessory header
Dan Shope
09:40 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
Why do you need <EOM> on a ticket name....unnecessary...
Latest pushed.
Kevin Woo
09:39 PM Revision 4ce7e37d (scoutece): Latest version of the library containing most of the scout parts
Kevin Woo

09/24/2010

01:03 PM Task #1425 (Fixed): Find new battery supplier
Dan Shope
01:02 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
Dan Shope
12:58 PM Revision bd96ce91 (colonymech): Prepped files for 3D printing. Added homing switch to stepper cover.
Dan Shope

09/23/2010

06:07 PM Revision 7fda8756 (colonymech): Added supports for front hood and circuit board mounting.
Dan Shope
04:38 AM Revision be6126b8 (colonymech): Updated stepper cover. Fixed interferences in sonar cover
unknown
04:00 AM Revision a3525daa (colonymech): Added stepper homing cover. 1 sheet metal version, 1 plastic vers...
unknown

09/22/2010

04:59 PM Revision 3a90bae3 (colonymech): Added cover for sonar boards
unknown
01:58 AM Revision 94564c47 (colonymech): Added Archives and Accessories. Updated rear chassis
unknown
12:49 AM Revision 506bf0d9 (colonymech): Initial commit of SolidWorks CAD model
unknown
09:25 PM Task #1425: Find new battery supplier
Looking for 1.35" x 1.35" x 2.5" battery. We can accommodate a longer battery (up to 4.5" long) or a shorter battery ... Dan Shope
09:22 PM Task #1425: Find new battery supplier
Closest to cost is: ($22.95 vs the old battery cost of $19.95). Note the spec is now only 3.0Ah, instead of 4.0Ah
ht...
Dan Shope
09:16 PM Task #818 (Fixed): Battery Testing
Dan Shope
09:15 PM Task #1431 (Wontfix): Spec front air filter foam
Front side panels are covered (inside) with open cell foam (gray/black). Find a thin foam suitable for some dust prot... Dan Shope
09:13 PM Task #844 (Wontfix): Bootloader
Dan Shope
09:13 PM Bug #1096: Orb Reflectors
Attach to inside of hood Dan Shope
09:13 PM Task #1098 (Wontfix): ask aaron and cornell about arm stuff
Dan Shope
09:13 PM Task #1381 (Fixed): acquire ATMega 128RFA1 chips
Dan Shope

09/21/2010

01:19 AM Task #1425: Find new battery supplier
Emailed BatterySpace.com about making a custom pack for us: NO DICE
Hi Dan,
Thanks for the inquiry.
The ba...
Dan Shope

09/19/2010

02:19 PM Task #1425 (Fixed): Find new battery supplier
BatterySpace.com no longer offers the Scout battery, and all comparable products are nearly 2x in price
http://www...
Dan Shope
 

Also available in: Atom