Activity
From 09/04/2010 to 10/03/2010
10/02/2010
- 02:02 PM Bug #1459 (Fixed): resize breakfly power traces
- 05:29 AM Bug #1459 (Fixed): resize breakfly power traces
- should be 10-16mils
- 01:25 AM Bug #1455 (Fixed): Rename Edge Detector silk
- Turns out that the cliff sensors are actually button headers, so I redid the silk.
- 12:45 AM Bug #1455: Rename Edge Detector silk
- Silk done.
The cliff sensor headers are not evenly spaced. Fix? - 12:46 AM Bug #1443: Investigate non-RA JST Headers
- Part changed to vertical on scoutfly.
- 12:45 AM Bug #1443 (Fixed): Investigate non-RA JST Headers
10/01/2010
- 03:57 PM Bug #1455 (Fixed): Rename Edge Detector silk
- On Scoutfly -- rename Edge Detectors to CLIFF0, CLIFF1, CLIFF2.
Cliff 0 is the front sensor, I believe this is lab... - 03:52 PM Task #999 (Fixed): Colony III Members
- 03:51 PM Task #974 (Fixed): Accessory Ball Bearing
- 03:51 PM Bug #1096 (Fixed): Orb Reflectors
- 03:51 PM Bug #1385 (Fixed): Scoutfly mounting holes to ground plane
- 03:50 PM Bug #1450 (Fixed): Sonar and Accessory Pin Numbering
- 03:50 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
09/30/2010
09/26/2010
- 03:52 PM Bug #1442: Scoutfly - Add Grounded Screw Holes
- Coordinates:
(150, 3350) (4350,3350)
(150,150) (4350,150) - 03:12 PM Bug #1442 (Fixed): Scoutfly - Add Grounded Screw Holes
- Add vias connected to ground
- .116 drill hole
- .179 pad diameter
- .250 diameter clearance for ring terminal
... - 03:20 PM Bug #1443 (Fixed): Investigate non-RA JST Headers
- What kind of footprint for vertical JST headers on right side of board?
- 03:10 PM Bug #1441 (Fixed): Scoutfly - Change resistor and capacitor values for BOM detector
- Resistors: 100 ohm
Capacitors: 0.1 uF - 03:08 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
- 02:30 PM Bug #1440 (Fixed): value change R8 and R9 on Scoutfly
- currently is 481ohms
we are sourcing 487ohm parts instead, so update values to reflect this change.
09/25/2010
- 01:21 PM Task #974: Accessory Ball Bearing
- Using http://www.mcmaster.com/#sleeve-bearings/=903cbo
Flange on bottom of chassis, extending up into a press-fit ... - 09:40 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
- Why do you need <EOM> on a ticket name....unnecessary...
Latest pushed.
09/24/2010
- 01:03 PM Task #1425 (Fixed): Find new battery supplier
- 01:02 PM Bug #1435 (Fixed): update scouthw git repo with your library <EOM>
09/22/2010
- 09:25 PM Task #1425: Find new battery supplier
- Looking for 1.35" x 1.35" x 2.5" battery. We can accommodate a longer battery (up to 4.5" long) or a shorter battery ...
- 09:22 PM Task #1425: Find new battery supplier
- Closest to cost is: ($22.95 vs the old battery cost of $19.95). Note the spec is now only 3.0Ah, instead of 4.0Ah
ht... - 09:16 PM Task #818 (Fixed): Battery Testing
- 09:15 PM Task #1431 (Wontfix): Spec front air filter foam
- Front side panels are covered (inside) with open cell foam (gray/black). Find a thin foam suitable for some dust prot...
- 09:13 PM Task #844 (Wontfix): Bootloader
- 09:13 PM Bug #1096: Orb Reflectors
- Attach to inside of hood
- 09:13 PM Task #1098 (Wontfix): ask aaron and cornell about arm stuff
- 09:13 PM Task #1381 (Fixed): acquire ATMega 128RFA1 chips
09/21/2010
- 01:19 AM Task #1425: Find new battery supplier
- Emailed BatterySpace.com about making a custom pack for us: NO DICE
Hi Dan,
Thanks for the inquiry.
The ba...
09/19/2010
- 02:19 PM Task #1425 (Fixed): Find new battery supplier
- BatterySpace.com no longer offers the Scout battery, and all comparable products are nearly 2x in price
http://www...
Also available in: Atom