root / branches / scout / CAD
Name | Size | Revision | Age | Author | Comment |
---|---|---|---|---|---|
Accessory Development | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... | |
Archive | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... | |
Charging Station | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... | |
Remote | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... | |
120-1 Mini Plastic Gearmotor 90-Deg Output.SLDPRT | 176 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
6655k13 Thrust Washers.SLDPRT | 494 KB | 1359 | over 14 years | Dan Shope | Redesign for use of Matbotix EZ1 Tunable Sonar ... |
BUMPER, FRONT.SLDPRT | 145 KB | 1359 | over 14 years | Dan Shope | Redesign for use of Matbotix EZ1 Tunable Sonar ... |
BUMPER, REAR.SLDPRT | 282 KB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
Battery Support.SLDPRT | 577 KB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
Bumper.SLDPRT | 145 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
CONNECTOR, MOLEX 6 PIN.SLDPRT | 201 KB | 1359 | over 14 years | Dan Shope | Redesign for use of Matbotix EZ1 Tunable Sonar ... |
COPPER CONTACT.SLDPRT | 149 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
COVER, FRONT.SLDPRT | 270 KB | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... |
Charging Bumper.SLDPRT | 143 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Charging Port.SLDPRT | 158 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Comparison.SLDASM | 1.98 MB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
Course Test.SLDASM | 1.85 MB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
DEMO, RENDER 1.SLDASM | 1.29 MB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
DRAWING, 0'065'' FLAT PATTERNS.DXF | 562 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
DRAWING, 0'065'' FLAT PATTERNS.SLDDRW | 485 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
FRONT, TOP LEVEL.SLDASM | 1.1 MB | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... |
Front Baseplate.SLDDRW | 344 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Front Baseplate.SLDPRT | 664 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Front IR Mount.SLDPRT | 491 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Front Shell.SLDPRT | 1.03 MB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
Full Assembly.SLDASM | 1.26 MB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Full Assembly.SLDDRW | 862 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
GP2Y0D810 Sensor.SLDPRT | 292 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
LED Dome.SLDPRT | 144 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
MOUNTING BLOCK, COLOR SENSOR.SLDPRT | 140 KB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
MOUNTING BLOCK, REAR.SLDPRT | 194 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
MOUNTING BLOCK, SONAR.SLDPRT | 120 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
MTMM-106-09-X-S-350.SLDPRT | 624 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Main PCB.SLDPRT | 355 KB | 1356 | almost 15 years | Dan Shope | Added GP2Y0D810 Sensor.SLDPRT for cliff detecti... |
Mounting Block.SLDDRW | 277 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
Mounting Block.SLDPRT | 252 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PCB, MAIN.SLDPRT | 324 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, FRONT BUMPER SIDE.SLDDRW | 115 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, FRONT BUMPER SIDE.SLDPRT | 613 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, FRONT BUMPER.SLDPRT | 282 KB | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... |
PLATE, FRONT.SLDPRT | 1.58 MB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, REAR COVER 0'032'' FLAT PATTERNS.DXF | 67.7 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, REAR COVER 0'032'' FLAT PATTERNS.SLDDRW | 158 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, REAR COVER.SLDPRT | 465 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
PLATE, REAR.SLDPRT | 1.01 MB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
Pololu 298-1 Motor.SLDPRT | 241 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Pololu 49x19 Wheel.SLDPRT | 639 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Pololu Extended Micro Metal Bracket.SLDPRT | 805 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Pololu Wheel Assembly.SLDASM | 1.4 MB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
REAR, TOP LEVEL.SLDASM | 2.88 MB | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... |
REFERENCE ASSEMBLY - Sheet1.pdf | 958 KB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
REFERENCE ASSEMBLY.SLDDRW | 1.73 MB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Rear Baseplate.SLDPRT | 541 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Rear Battery Strap.SLDPRT | 188 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Rear Sensor Bracket.SLDPRT | 191 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Rear Shell.SLDPRT | 440 KB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
Rollbar Crossbar.SLDPRT | 94.5 KB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
Rollbar.SLDPRT | 108 KB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
SCOUT REVC 07-22-2009.zip | 6.65 MB | 1359 | over 14 years | Dan Shope | Redesign for use of Matbotix EZ1 Tunable Sonar ... |
SCOUT, TOP LEVEL 10-13-2009.easm | 900 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
SCOUT, TOP LEVEL 10-27-2009.easm | 893 KB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
SCOUT, TOP LEVEL 10-29-2009.easm | 867 KB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
SCOUT, TOP LEVEL.SLDASM | 2.67 MB | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... |
SCOUT, TOP LEVEL.easm | 667 KB | 1470 | over 14 years | Dan Shope | New: -Charging Station intial Design Updates: -... |
SENSOR, COLOR LED.SLDPRT | 147 KB | 1359 | over 14 years | Dan Shope | Redesign for use of Matbotix EZ1 Tunable Sonar ... |
SENSOR, GP2D12.sldprt | 238 KB | 1359 | over 14 years | Dan Shope | Redesign for use of Matbotix EZ1 Tunable Sonar ... |
SENSOR, GP2Y0D810.SLDPRT | 245 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
SENSOR, SONAR HOUSING.SLDPRT | 354 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
SHAFT, SONAR MOUNT.SLDPRT | 93.5 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
SHAFT, SONAR SUPPORT.SLDPRT | 253 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
SHAFT, STEPPER SUPPORT.SLDPRT | 140 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
SW3dPS-521-9327.SLDPRT | 208 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Scout Front End.SLDASM | 1020 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Scout Rear End.SLDASM | 2.13 MB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Sensor Arm.SLDPRT | 161 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Sensor Bar.SLDPRT | 186 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Sensor PCB - Sheet1.pdf | 22.1 KB | 1353 | almost 15 years | Dan Shope | Added holes to Front Baseplate.SLDPRT for IR mo... |
Sensor PCB Standoff.SLDPRT | 156 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
Sensor PCB.SLDDRW | 109 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Sensor PCB.SLDPRT | 306 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Short Rollbar.SLDPRT | 97.5 KB | 1357 | almost 15 years | Dan Shope | Added Rollcage to protect circuitry and sensors... |
Side IR Mount - Sheet1.pdf | 24.6 KB | 1353 | almost 15 years | Dan Shope | Added holes to Front Baseplate.SLDPRT for IR mo... |
Side IR Mount.SLDDRW | 162 KB | 1353 | almost 15 years | Dan Shope | Added holes to Front Baseplate.SLDPRT for IR mo... |
Side IR Mount.SLDPRT | 276 KB | 1356 | almost 15 years | Dan Shope | Added GP2Y0D810 Sensor.SLDPRT for cliff detecti... |
TOOL, WHEEL COVER CALIBRATION.SLDPRT | 133 KB | 1459 | over 14 years | Dan Shope | Updated design: larger wire passageway PCB now ... |
WHEEL ASSEMBLY.SLDASM | 3.7 MB | 1474 | over 14 years | Dan Shope | Updated charging station for mechanical corral,... |
XBEE PCB.SLDPRT | 447 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
XBEE Pro.sldasm | 223 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
bom_standoff.sldprt | 120 KB | 1350 | almost 15 years | Dan Shope | Added CAD Models and supporting documentation/r... |
gp2d12.sldprt | 238 KB | 1358 | almost 15 years | Dan Shope | Redesign of baseplates to incorporate roll cage... |
Latest revisions
Also available in: Atom