Project

General

Profile

Statistics
| Revision:

root / branches / autonomous_recharging / code / projects / colonet / utilities / dragonfly_wireless_relay / Makefile @ 1390

History | View | Annotate | Download (14.2 KB)

1
# Hey Emacs, this is a -*- makefile -*-
2
#----------------------------------------------------------------------------
3
# WinAVR Makefile Template written by Eric B. Weddington, J?rg Wunsch, et al.
4
#
5
# Released to the Public Domain
6
#
7
# Additional material for this makefile was written by:
8
# Peter Fleury
9
# Tim Henigan
10
# Colin O'Flynn
11
# Reiner Patommel
12
# Markus Pfaff
13
# Sander Pool
14
# Frederik RouleauF
15
#
16
#----------------------------------------------------------------------------
17
# On command line:
18
#
19
# make all = Make software.
20
#
21
# make clean = Clean out built project files.
22
#
23
# make coff = Convert ELF to AVR COFF.
24
#
25
# make extcoff = Convert ELF to AVR Extended COFF.
26
#
27
# make program = Download the hex file to the device, using avrdude.
28
#                Please customize the avrdude settings below first!
29
#
30
# make debug = Start either simulavr or avarice as specified for debugging, 
31
#              with avr-gdb or avr-insight as the front end for debugging.
32
#
33
# make filename.s = Just compile filename.c into the assembler code only.
34
#
35
# make filename.i = Create a preprocessed source file for use in submitting
36
#                   bug reports to the GCC project.
37
#
38
# To rebuild project do "make clean" then "make all".
39
#----------------------------------------------------------------------------
40

    
41
#if you want your code to work on the Firefly++ and not Firefly+
42
#then add the -DFFPP line to CDEFS
43
COLONYROOT = y:
44
CDEFS = 
45
#-DFFPP
46

    
47
# MCU name
48
MCU = atmega128
49

    
50

    
51
# Processor frequency.
52
#     This will define a symbol, F_CPU, in all source code files equal to the 
53
#     processor frequency. You can then use this symbol in your source code to 
54
#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
55
#     automatically to create a 32-bit value in your source code.
56
F_CPU = 8000000
57

    
58

    
59
# Output format. (can be srec, ihex, binary)
60
FORMAT = ihex
61

    
62

    
63
# Target file name (without extension).
64
TARGET = dragonflyWirelessRelay
65

    
66

    
67
# List C source files here. (C dependencies are automatically generated.)
68
SRC = $(wildcard *.c)
69
#$(TARGET).c 
70

    
71

    
72
# List Assembler source files here.
73
#     Make them always end in a capital .S.  Files ending in a lowercase .s
74
#     will not be considered source files but generated files (assembler
75
#     output from the compiler), and will be deleted upon "make clean"!
76
#     Even though the DOS/Win* filesystem matches both .s and .S the same,
77
#     it will preserve the spelling of the filenames, and gcc itself does
78
#     care about how the name is spelled on its command-line.
79
ASRC = 
80

    
81

    
82
# Optimization level, can be [0, 1, 2, 3, s]. 
83
#     0 = turn off optimization. s = optimize for size.
84
#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
85
OPT = s
86

    
87

    
88
# Debugging format.
89
#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
90
#     AVR Studio 4.10 requires dwarf-2.
91
#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
92
#DEBUG = dwarf-2
93

    
94

    
95
# List any extra directories to look for include files here.
96
#     Each directory must be seperated by a space.
97
#     Use forward slashes for directory separators.
98
#     For a directory that has spaces, enclose it in quotes.
99
EXTRAINCDIRS = $(COLONYROOT)/code/firefly_plus_lib
100
#C:\WinAVR\include\fwr
101

    
102

    
103
# Compiler flag to set the C Standard level.
104
#     c89   = "ANSI" C
105
#     gnu89 = c89 plus GCC extensions
106
#     c99   = ISO C99 standard (not yet fully implemented)
107
#     gnu99 = c99 plus GCC extensions
108
CSTANDARD = -std=gnu99
109

    
110

    
111
# Place -D or -U options here
112
CDEFS += -DF_CPU=$(F_CPU)UL 
113
CDEFS += -DFFP
114

    
115

    
116
# Place -I options here
117
CINCS =
118

    
119

    
120

    
121
#---------------- Compiler Options ----------------
122
#  -g*:          generate debugging information
123
#  -O*:          optimization level
124
#  -f...:        tuning, see GCC manual and avr-libc documentation
125
#  -Wall...:     warning level
126
#  -Wa,...:      tell GCC to pass this to the assembler.
127
#    -adhlns...: create assembler listing
128
CFLAGS = -g$(DEBUG)
129
CFLAGS += $(CDEFS) $(CINCS)
130
CFLAGS += -O$(OPT)
131
CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
132
CFLAGS += -Wall -Wstrict-prototypes
133
CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
134
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
135
CFLAGS += $(CSTANDARD)
136

    
137

    
138
#---------------- Assembler Options ----------------
139
#  -Wa,...:   tell GCC to pass this to the assembler.
140
#  -ahlms:    create listing
141
#  -gstabs:   have the assembler create line number information; note that
142
#             for use in COFF files, additional information about filenames
143
#             and function names needs to be present in the assembler source
144
#             files -- see avr-libc docs [FIXME: not yet described there]
145
ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
146

    
147

    
148
#---------------- Library Options ----------------
149
# Minimalistic printf version
150
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
151

    
152
# Floating point printf version (requires MATH_LIB = -lm below)
153
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
154

    
155
# If this is left blank, then it will use the Standard printf version.
156
PRINTF_LIB = 
157
#PRINTF_LIB = $(PRINTF_LIB_MIN)
158
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
159

    
160

    
161
# Minimalistic scanf version
162
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
163

    
164
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
165
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
166

    
167
# If this is left blank, then it will use the Standard scanf version.
168
SCANF_LIB = 
169
#SCANF_LIB = $(SCANF_LIB_MIN)
170
#SCANF_LIB = $(SCANF_LIB_FLOAT)
171

    
172

    
173
MATH_LIB = -lm
174

    
175

    
176

    
177
#---------------- External Memory Options ----------------
178

    
179
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
180
# used for variables (.data/.bss) and heap (malloc()).
181
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
182

    
183
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
184
# only used for heap (malloc()).
185
#EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
186

    
187
EXTMEMOPTS =
188

    
189

    
190

    
191
#---------------- Linker Options ----------------
192
#  -Wl,...:     tell GCC to pass this to linker.
193
#    -Map:      create map file
194
#    --cref:    add cross reference to  map file
195
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
196
LDFLAGS += $(EXTMEMOPTS)
197
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
198

    
199

    
200

    
201
#---------------- Programming Options (avrdude) ----------------
202

    
203
# Programming hardware: alf avr910 avrisp bascom bsd 
204
# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
205
#
206
# Type: avrdude -c ?
207
# to get a full listing.
208
#
209
AVRDUDE_PROGRAMMER = avrisp
210

    
211
# com1 = serial port. Use lpt1 to connect to parallel port.
212
AVRDUDE_PORT = $(shell if uname -s |grep -i w32 >/dev/null; then echo 'COM4:'; else echo '/dev/ttyUSB0'; fi)
213
# programmer connected to serial device
214

    
215
AVRDUDE_WRITE_FLASH = -b 57600 -U flash:w:$(TARGET).hex
216
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
217

    
218

    
219
# Uncomment the following if you want avrdude's erase cycle counter.
220
# Note that this counter needs to be initialized first using -Yn,
221
# see avrdude manual.
222
#AVRDUDE_ERASE_COUNTER = -y
223

    
224
# Uncomment the following if you do /not/ wish a verification to be
225
# performed after programming the device.
226
AVRDUDE_NO_VERIFY = -V
227

    
228
# Increase verbosity level.  Please use this when submitting bug
229
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
230
# to submit bug reports.
231
#AVRDUDE_VERBOSE = -v -v
232

    
233
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
234
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
235
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
236
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
237

    
238
#don't check for device signature
239
AVRDUDE_FLAGS += -F
240

    
241

    
242

    
243
#---------------- Debugging Options ----------------
244

    
245
# For simulavr only - target MCU frequency.
246
DEBUG_MFREQ = $(F_CPU)
247

    
248
# Set the DEBUG_UI to either gdb or insight.
249
# DEBUG_UI = gdb
250
DEBUG_UI = insight
251

    
252
# Set the debugging back-end to either avarice, simulavr.
253
DEBUG_BACKEND = avarice
254
#DEBUG_BACKEND = simulavr
255

    
256
# GDB Init Filename.
257
GDBINIT_FILE = __avr_gdbinit
258

    
259
# When using avarice settings for the JTAG
260
JTAG_DEV = /dev/ttyUSB0
261

    
262
# Debugging port used to communicate between GDB / avarice / simulavr.
263
DEBUG_PORT = 4242
264

    
265
# Debugging host used to communicate between GDB / avarice / simulavr, normally
266
#     just set to localhost unless doing some sort of crazy debugging when 
267
#     avarice is running on a different computer.
268
DEBUG_HOST = localhost
269

    
270

    
271

    
272
#============================================================================
273

    
274

    
275
# Define programs and commands.
276
SHELL = sh
277
CC = avr-gcc
278
OBJCOPY = avr-objcopy
279
OBJDUMP = avr-objdump
280
SIZE = avr-size
281
NM = avr-nm
282
AVRDUDE = avrdude
283
REMOVE = rm -f
284
REMOVEDIR = rm -rf
285
COPY = cp
286
WINSHELL = cmd
287

    
288

    
289
# Define Messages
290
# English
291
MSG_ERRORS_NONE = Errors: none
292
MSG_BEGIN = -------- begin --------
293
MSG_END = --------  end  --------
294
MSG_SIZE_BEFORE = Size before: 
295
MSG_SIZE_AFTER = Size after:
296
MSG_COFF = Converting to AVR COFF:
297
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
298
MSG_FLASH = Creating load file for Flash:
299
MSG_EEPROM = Creating load file for EEPROM:
300
MSG_EXTENDED_LISTING = Creating Extended Listing:
301
MSG_SYMBOL_TABLE = Creating Symbol Table:
302
MSG_LINKING = Linking:
303
MSG_COMPILING = Compiling:
304
MSG_ASSEMBLING = Assembling:
305
MSG_CLEANING = Cleaning project:
306

    
307

    
308

    
309

    
310
# Define all object files.
311
OBJ = $(SRC:.c=.o) $(ASRC:.S=.o) 
312

    
313
# Define all listing files.
314
LST = $(SRC:.c=.lst) $(ASRC:.S=.lst) 
315

    
316

    
317
# Compiler flags to generate dependency files.
318
GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
319

    
320

    
321
# Combine all necessary flags and optional flags.
322
# Add target processor to flags.
323
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
324
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
325

    
326

    
327

    
328

    
329

    
330
# Default target.
331
all: begin gccversion sizebefore build sizeafter end
332

    
333
build: elf hex eep lss sym
334

    
335
elf: $(TARGET).elf
336
hex: $(TARGET).hex
337
eep: $(TARGET).eep
338
lss: $(TARGET).lss 
339
sym: $(TARGET).sym
340

    
341

    
342

    
343
# Eye candy.
344
# AVR Studio 3.x does not check make's exit code but relies on
345
# the following magic strings to be generated by the compile job.
346
begin:
347
	@echo
348
	@echo $(MSG_BEGIN)
349

    
350
end:
351
	@echo $(MSG_END)
352
	@echo
353

    
354

    
355
# Display size of file.
356
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
357
ELFSIZE = $(SIZE) -A $(TARGET).elf
358
AVRMEM = avr-mem.sh $(TARGET).elf $(MCU)
359

    
360
sizebefore:
361
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
362
	$(AVRMEM) 2>/dev/null; echo; fi
363

    
364
sizeafter:
365
	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
366
	$(AVRMEM) 2>/dev/null; echo; fi
367

    
368

    
369

    
370
# Display compiler version information.
371
gccversion : 
372
	@$(CC) --version
373

    
374

    
375

    
376
# Program the device.  
377
program: $(TARGET).hex $(TARGET).eep
378
	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
379

    
380

    
381
# Generate avr-gdb config/init file which does the following:
382
#     define the reset signal, load the target file, connect to target, and set 
383
#     a breakpoint at main().
384
gdb-config: 
385
	@$(REMOVE) $(GDBINIT_FILE)
386
	@echo define reset >> $(GDBINIT_FILE)
387
	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
388
	@echo end >> $(GDBINIT_FILE)
389
	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
390
	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
391
ifeq ($(DEBUG_BACKEND),simulavr)
392
	@echo load  >> $(GDBINIT_FILE)
393
endif	
394
	@echo break main >> $(GDBINIT_FILE)
395
	
396
debug: gdb-config $(TARGET).elf
397
ifeq ($(DEBUG_BACKEND), avarice)
398
	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
399
	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
400
	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
401
	@$(WINSHELL) /c pause
402
	
403
else
404
	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
405
	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
406
endif
407
	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
408
	
409

    
410

    
411

    
412
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
413
COFFCONVERT=$(OBJCOPY) --debugging \
414
--change-section-address .data-0x800000 \
415
--change-section-address .bss-0x800000 \
416
--change-section-address .noinit-0x800000 \
417
--change-section-address .eeprom-0x810000 
418

    
419

    
420
coff: $(TARGET).elf
421
	@echo
422
	@echo $(MSG_COFF) $(TARGET).cof
423
	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
424

    
425

    
426
extcoff: $(TARGET).elf
427
	@echo
428
	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
429
	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
430

    
431

    
432

    
433
# Create final output files (.hex, .eep) from ELF output file.
434
%.hex: %.elf
435
	@echo
436
	@echo $(MSG_FLASH) $@
437
	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
438

    
439
%.eep: %.elf
440
	@echo
441
	@echo $(MSG_EEPROM) $@
442
	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
443
	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
444

    
445
# Create extended listing file from ELF output file.
446
%.lss: %.elf
447
	@echo
448
	@echo $(MSG_EXTENDED_LISTING) $@
449
	$(OBJDUMP) -h -S $< > $@
450

    
451
# Create a symbol table from ELF output file.
452
%.sym: %.elf
453
	@echo
454
	@echo $(MSG_SYMBOL_TABLE) $@
455
	$(NM) -n $< > $@
456

    
457

    
458

    
459
# Link: create ELF output file from object files.
460
.SECONDARY : $(TARGET).elf
461
.PRECIOUS : $(OBJ)
462
%.elf: $(OBJ)
463
	@echo
464
	@echo $(MSG_LINKING) $@
465
	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
466

    
467

    
468
# Compile: create object files from C source files.
469
%.o : %.c
470
	@echo
471
	@echo $(MSG_COMPILING) $<
472
	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
473

    
474

    
475
# Compile: create assembler files from C source files.
476
%.s : %.c
477
	$(CC) -S $(ALL_CFLAGS) $< -o $@
478

    
479

    
480
# Assemble: create object files from assembler source files.
481
%.o : %.S
482
	@echo
483
	@echo $(MSG_ASSEMBLING) $<
484
	$(CC) -c $(ALL_ASFLAGS) $< -o $@
485

    
486
# Create preprocessed source for use in sending a bug report.
487
%.i : %.c
488
	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
489

    
490

    
491
# Target: clean project.
492
clean: begin clean_list end
493

    
494
clean_list :
495
	@echo
496
	@echo $(MSG_CLEANING)
497
	$(REMOVE) $(TARGET).hex
498
	$(REMOVE) $(TARGET).eep
499
	$(REMOVE) $(TARGET).cof
500
	$(REMOVE) $(TARGET).elf
501
	$(REMOVE) $(TARGET).map
502
	$(REMOVE) $(TARGET).sym
503
	$(REMOVE) $(TARGET).lss
504
	$(REMOVE) $(OBJ)
505
	$(REMOVE) $(LST)
506
	$(REMOVE) $(SRC:.c=.s)
507
	$(REMOVE) $(SRC:.c=.d)
508
	$(REMOVEDIR) .dep
509

    
510

    
511

    
512
# Include the dependency files.
513
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
514

    
515

    
516
# Listing of phony targets.
517
.PHONY : all begin finish end sizebefore sizeafter gccversion \
518
build elf hex eep lss sym coff extcoff \
519
clean clean_list program debug gdb-config
520