Project

General

Profile

Statistics
| Revision:

root / trunk / code / projects / diagnostic_station @ 1296

# Date Author Comment
1296 05/03/2009 03:16 PM Martin Herrmann

All component numbers start a 0 (e. g. rangefinder: 0..4 rather than 1..5).

1295 05/03/2009 03:05 PM Martin Herrmann

Parameters for encoder test as parameters

1294 05/03/2009 02:58 PM Martin Herrmann

Clarified left/right on IBOM

1293 05/03/2009 02:56 PM Martin Herrmann

Resetting the encoders (robot)/dynamos (station) when starting dump

1292 05/03/2009 02:55 PM Martin Herrmann

Implemented turntable positions in BOM test.

1291 05/03/2009 02:36 PM Martin Herrmann

Fixed left/right (for real this time)

1290 05/03/2009 02:28 PM Martin Herrmann

Fixed: left/right switched

1289 05/03/2009 02:25 PM Martin Herrmann

Fixed messages: newline at the end

1288 05/03/2009 02:17 PM Martin Herrmann

Fixed messages (all messages which are not commands need to have a # in front)

1287 05/02/2009 10:43 PM Brad Neuman

turntable_rotate_to_position doesn't do anything now so it should be safe to call in the tests

1286 05/02/2009 10:09 PM John Sexton

Implemented ibom_update() function. Found the analog ports for the IR
LED detectors, and found the pin for the IR LED emitter.

1285 05/02/2009 08:28 PM Kevin Woo

Added shitty position control. Needs encoders to not suck.

1284 05/02/2009 07:46 PM Martin Herrmann
1283 05/02/2009 07:25 PM Brad Neuman

added some movement code, although NOT a control law so don't use it

1282 05/02/2009 07:16 PM Martin Herrmann

Fixes: robot_read_bom_all

1281 05/02/2009 07:07 PM Kevin Woo

Finished wall init. Calibrates it to the 0 point correctly.

1280 05/02/2009 07:03 PM John Sexton

Implemented ibom_set and ibom_read functions.

1279 05/02/2009 07:00 PM Martin Herrmann

Fixes

1276 05/02/2009 06:40 PM Evan Mullinix

added command to read all bom

1275 05/02/2009 06:32 PM Evan Mullinix

added command to read all bom

1274 05/02/2009 06:30 PM Evan Mullinix

added command to read all bom data

1273 05/02/2009 06:30 PM Evan Mullinix

added add command to read all bom data

1272 05/02/2009 06:17 PM Martin Herrmann

Added "interactive" command in server mode
Moved hardware_init out of interactive_main
Made calling interactive_main/server_main more consistent

1271 05/02/2009 06:01 PM Martin Herrmann

Added "start_test bom emitter..." and "start_test bom detector"
Bugfix: bom dump reading rangefinder values

1270 05/02/2009 05:17 PM Evan Mullinix

trying to debug bom communication

1269 05/02/2009 05:10 PM Martin Herrmann

Improved robot sensor dump format

1267 05/02/2009 04:57 PM Martin Herrmann

Improved station dump mode
Added station dump ADC mode
Removed IBOM debug functions (superseded by dump mode)

1266 05/02/2009 04:24 PM Kevin Woo

Made is so that hardware_dynamos.c does not mess up anyone else who is using
external interrupts by blowing away their interrupt settings.

1264 05/02/2009 04:13 PM Evan Mullinix

implemented sending bom data

1263 05/02/2009 04:10 PM Martin Herrmann

Added ADC dump on the station

1262 05/02/2009 04:05 PM Brad Neuman

added a call to hardware_init to the interactive_main function in comm_interactive.c

1261 05/02/2009 03:58 PM Martin Herrmann

Fixed naming

1260 05/02/2009 03:46 PM Evan Mullinix

implemented bom

1259 05/02/2009 03:46 PM Evan Mullinix

added bom

1258 05/02/2009 03:45 PM Evan Mullinix

fixed typo

1257 05/02/2009 03:41 PM Brad Neuman

oops

1256 05/02/2009 03:41 PM Martin Herrmann

rbom->ibom

1255 05/02/2009 03:41 PM Brad Neuman

renamed the _encoders files to _dynamos

1254 05/02/2009 03:40 PM Martin Herrmann

Changed rbom->ibom

1251 05/02/2009 03:34 PM Martin Herrmann
1250 05/02/2009 03:26 PM Martin Herrmann

Improved motors test

1249 05/02/2009 03:02 PM Evan Mullinix

added rangefinder data communication

1248 05/02/2009 03:02 PM Evan Mullinix

added rangefinder data communication

1247 05/02/2009 03:01 PM Evan Mullinix

added rangefinder data communication

1246 05/02/2009 02:30 PM Martin Herrmann

Implemented all robot sensor dump functions

1245 05/02/2009 01:58 PM Martin Herrmann

Changed some function signatures for robot communication

1244 05/02/2009 01:47 PM Martin Herrmann

Added interactive dump modes
Changed RBOM detector number and names

1242 05/02/2009 12:49 PM Martin Herrmann

Moved interactive_main to comm_interactive.c
Added multiple menus in interactive mode

1236 05/01/2009 02:48 PM Martin Herrmann
1235 05/01/2009 02:23 PM Martin Herrmann

Miner script cleanup

1232 04/29/2009 09:05 PM Martin Herrmann
1231 04/29/2009 08:54 PM Martin Herrmann
1230 04/29/2009 08:50 PM Martin Herrmann
1229 04/29/2009 08:48 PM Martin Herrmann

Added plotting script

1226 04/27/2009 09:09 PM Martin Herrmann

Robot/Station communication:
- Implemented timeouts
- Implemented command acknowledgement

1220 04/26/2009 07:31 PM Martin Herrmann
1219 04/26/2009 07:17 PM Martin Herrmann

Added reset_encoders command
Fixed bugs

1218 04/26/2009 06:58 PM Martin Herrmann

Fixing Station/Robot communication

1215 04/26/2009 12:07 AM Martin Herrmann

Implemented encoders test

1214 04/25/2009 11:47 PM Martin Herrmann

Implemented motors test

1213 04/25/2009 11:21 PM Martin Herrmann

Finished rangefinders test implementation

1212 04/25/2009 10:42 PM Martin Herrmann

Finished the bom test (calling the not-finished hardware functions for now)

1208 04/25/2009 08:03 PM Martin Herrmann

Moved usb_puts_P from diagnostic station to library

1206 04/25/2009 07:30 PM Martin Herrmann

Fixed code duplication

1205 04/25/2009 07:20 PM Martin Herrmann

Implemented single encoder testing
Cleaned up motor direction/wall direction naming

1204 04/25/2009 07:09 PM Martin Herrmann

Implemented single motor testing

1203 04/25/2009 06:43 PM Martin Herrmann

Station server communication: implemented dummy data sending

1202 04/25/2009 06:12 PM Martin Herrmann

Station/server communication:
- Implemented backspace handling
- Implemented all test starting commands with parameter
Tests:
- Added functions for testing only one component of a kind
- Made function names consistent with server commands

1198 04/24/2009 09:52 PM Martin Herrmann

Added server communication parameter parsing
Misc. fixes

1196 04/24/2009 04:05 PM Evan Mullinix

finished sending encoder data

1195 04/24/2009 04:04 PM Evan Mullinix

finished storing encoder data

1194 04/24/2009 01:07 PM Evan Mullinix

defs for robot -> station communication

1193 04/24/2009 01:07 PM Evan Mullinix

robot can send data to station

1192 04/24/2009 01:06 PM Evan Mullinix

added infrastructure for robot to send data to station

1189 04/23/2009 01:28 AM John Sexton

Eliminated stationCode folder by merging necessary components into station folder.

1188 04/22/2009 11:46 PM Martin Herrmann

Changed Makefile target name to target

1187 04/22/2009 11:45 PM Martin Herrmann

Added multiple main functions hack

1185 04/22/2009 10:30 PM Martin Herrmann

Server communication: basic message processing

1183 04/22/2009 09:59 PM Martin Herrmann

Added individual hardware component files

1182 04/22/2009 09:43 PM Martin Herrmann

Made filenames more consistent
Made function names more consistent
Introduced separate functions for hardware components

1181 04/22/2009 06:30 PM Martin Herrmann

Made it compile again

1171 04/21/2009 10:30 PM Martin Herrmann

Started work on server communication code

1170 04/21/2009 10:03 PM Evan Mullinix

added read encoders command

1169 04/21/2009 09:51 PM Martin Herrmann

Added server_comm.c/server_comm.h
Added tests.c/tests.h

1168 04/21/2009 09:37 PM Austin Buchan

Encoder code added, tested, works. There are 720 ticks per dyno shaft revolution.

1167 04/21/2009 09:17 PM Evan Mullinix

added encoder read command for station

1166 04/21/2009 09:01 PM Martin Herrmann

Added # to the beginning of every USB output line, as it should not be interpreted by the server.

1165 04/21/2009 08:50 PM Martin Herrmann

Removed UI/, it has been merged into station/main

1164 04/21/2009 08:42 PM Martin Herrmann

Added message_set_motors_time
Added message_set_motors_off

1160 04/21/2009 02:01 PM Martin Herrmann

Do all tests if button 1 is pressed after startup.

1159 04/21/2009 01:56 PM Martin Herrmann

Added robot code
Added robot/station communication

1154 04/19/2009 08:16 PM Martin Herrmann
1153 04/19/2009 06:58 PM Martin Herrmann
1152 04/19/2009 06:51 PM Martin Herrmann

Added self test and communications test

1151 04/18/2009 02:14 PM Martin Herrmann
1150 04/17/2009 05:50 PM Martin Herrmann

Added OS detection to Makefile
Added robot and station directories

1137 04/14/2009 05:36 PM John Sexton

Added functions to allow for user-viewable data dump versus a computer-usable data dump. Code will sample specified ports and print values. Was used
to determine which ports are being used for the inverse BOM.

1136 04/14/2009 12:53 PM John Sexton

Includes code to sample all analog inputs. Used to determine which ports the inverse BOM are connected to.

1133 04/13/2009 11:38 PM John Sexton

Small update to code which reads analog ports.

1123 04/08/2009 11:27 PM John Sexton

Updated README files to better reflect folder contents.